Ubique Alloys Pvt. Ltd is a distinguished exporter and stockist of ASTM A193 B8M Bolts, which have excellent resistance to oxidation. The high molybdenum content gives ASTM A193 B8M Hex Head Bolts a higher resistance to corrosion in sulfuric media than standard grades. ASTM A193 B8M Square Bolts was developed primarily to resist more effectively the attack of sulfurous acid compounds. ASTM A193 B8M U Bolts is used for air pollution control, power generation, food and beverage processing, pulp and paper, etc. ASTM A193 B8M Eye Bolts is suitable for: Flue gas desulfurization scrubber systems, Condensers in fossil fuel processing, Pulp and paper manufacturing, etc. ASTM A193 B8M T Bolts is also used for Nuclear fueled power generation stations, Chemical and petrochemical process equipment, etc. ASTM A193 B8M Hex Bolts is as well used for Chemical process vessels, Petrochemical, Pulp and Paper, Condensers in power generation, etc. ASTM A193 B8M Lag Bolts demonstrates a low rate of scaling in ordinary atmospheres at temperatures up to 1600 Degree F – 1650 Degree F (871 Degree C – 899 Degree C).

One exception for ASTM A193 B8M Counter Sunk Bolts, however, is strongly oxidizing acids such as nitric acid. The combination of molybdenum and nitrogen in ASME SA 193 B8M Bolts is particularly effective in enhancing resistance to pitting and crevice corrosion. A notable exception for ASME SA 193 B8M Hex Head Bolts is in environments sufficiently corrosive to cause inter-granular corrosion of welds and heat-affected zones on susceptible alloys.