Ubique Alloys Pvt. Ltd is a renowned supplier, manufacturer and exporter of Phosphorous Fasteners, which is available at market leading prices for our customers. The low carbon content of Phosphorous Nuts provides immunity to inter-granular corrosion in applications where heavy cross sections cannot be annealed after welding or where low temperature stress relieving treatments are desired. It is tougher than other steel with a long stringy chip, and so the use of chip breakers in Phosphorous Bolts is recommended. Because of Phosphorous Washers benefits and chemical composition, it is used extensively in a variety of industries for many applications. Annealing for Phosphorous Screws is performed at 1010 Degree C – 1121 Degree C (1850 Degree F – 2050 Degree F), which should be followed by rapid cooling. At temperatures as high as 120 Degree F (49 Degree C), Phosphorous Stud Bolts are resistant to concentrations of this acid. Phosphorous Hex Head Nuts can be welded by shielded fusion and resistance methods, but oxyacetylene welding should be avoided to prevent carbon pick up in the welds.

Phosphorous Hex Head Bolts has corrosion resistant, including furnace parts such as conveyor belts, rollers, burner parts, refractory supports, retorts and oven linings, fans, tube hangers, and baskets and trays to hold small parts. Phosphorous Hex Head Screws are suitable for vertical organizations for boiler units, power generation plants, heat exchangers units, oil and gas exploration, etc.