Ubique Alloys Pvt. Ltd is a prominent manufacturer and exporter of Inconel 625 Fasteners, which is resistant to stress corrosion cracking in chloride salts and to attack from non-oxidizing halides. Alloy 625 Fasteners is resistant to various reducing chemicals & caustic alkalis, along with good magnetostrictive properties. Annealing of Nickel-Alloy 625 Fasteners should be performed at a temperature between 1300 Degree F and 1600 Degree F. Nickel-Chromium Alloy 625 Fasteners is better suited for applications where temperatures will exceed 315 Degree C (600 Degree F), as the lower carbon content means that it will not form graphite after extended exposure to high temperatures, unlike its companion. Inconel UNS N06625 Fasteners can be cold rolled to various tempers, because the corrosion resistance in unventilated acids is better. Inconel 625 Nuts are ferromagnetic and exhibit highly ductile mechanical properties across a wide temperature range. Inconel 625 Bolts should be noted that long exposure of 200 to temperatures in the range 800 Degree F / 1200 Degree F (425 Degree C / 650 Degree C) will result in graphite precipitation. Inconel 625 Washers is a commercially pure wrought alloy having excellent properties, but with a lower carbon content to avoid embrittlement by inter-granular carbon at high temperatures. Anneal of Inconel 625 Stud Bolts should be done depending upon time at temperature and amount of cold working that has been done.