Inconel 601 Round Bars (UNS N06601 Bar) Patta & Patti
Inconel 601 Round Bars, Inconel 601 Square Bars, Inconel 601 Bright Round Bars, Inconel 601 Matt Finish Round Bars, Inconel Alloy 601 Hexagonal Bars, WERKSTOFF NR. 2.4851 Flat Bars, Inconel 601 Hexagonal Bars, ASTM B166 Inconel 601 Triangular Bars, Inconel 601 Threaded Bars, Inconel 601 NO.4 Finish Bars, Inconel UNS N06601 Hollow Bars Manufacturer & Supplier Dealer in India.
Inconel Alloy 601 Round Bars from Ubique Alloys Pvt. Ltd have been used to transport chemicals and aircraft components. Electrical, thermal, and magneto-astrictive characteristics are also good in Inconel 601 Square Bars. Low gas concentration, low vapour pressure, magnetic characteristics, and more are all features of Inconel 601 Flat Bars. Carbon content becomes crucial when operating temperatures in Inconel 601 Threaded Bars are predicted to exceed 600 degrees Fahrenheit. Inconel 601 Hollow Bars have a wide temperature range of ductility, ferromagnetism, and electrical and thermal conductivity. The electric and thermal conductivities, as well as the magnetostrictive properties, of Alloy 601 Rods are excellent. Magnetic characteristics, strong thermal and electrical conductivities, low gas content, and low vapour pressure are all advantages of Inconel 601 Hexagonal Bars. Inconel 601 Triangular Bars are a commercially pure nickel grade that is widely employed in a variety of industrial applications.
The lower carbon chemistry of Inconel 601 Patta & Patti is chosen for use at temperatures exceeding 600 degrees Fahrenheit (315 Degree C). Caustic liquids, food handling equipment, and general corrosion-resistant parts and structures all require Inconel 601 Rods. High thermal and electrical conductivities, low gas content, and low vapour pressure characterise Inconel UNS N06601 Round Bars.
Alloy 601 Bars are ferromagnetic and have good thermal, electrical, and magnetostrictive properties.
Inconel 601 Round Bars Specification
| Inconel 601 Bar Standard | ASTM B166, AMS 5513, AMS 5511, AMS 5647 |
|---|---|
| Inconel 601 Bar Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Inconel 601 Round bar size | Diameter: 3-~800mm |
| Inconel 601 Hex Bar size | 2-100mm A/F |
| Inconel Alloy 601 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Inconel 601 Square bar size | 4 to 100mm |
| Alloy 601 Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Alloy 601 Rectangular Bars Section | 3.0 to 12.0mm thickness |
| Inconel 601 Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| ASTM B166 Type 601 Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Inconel Alloy 601 Threaded Bar Billet Size | 1/2 to 495mm Diameter |
| Inconel 601 Rectangular Size | 33 x 30mm to 295 x 1066mm |
| 601 Alloy Hex Bars Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| ASTM B166 Type 601 Hollow Bar Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| JIS NCF 601 T-Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Rolled Inconel 601 Flat Bars Condition | Hardened & tempered, annealed |
| ASTM B166 Type 601 Cold Rolled Bar Technique | 601 Alloy Hot Rolled, Cold Drawn, Cold Rolled, Forged Round Bar, Rod |
| Inconel Alloy 601 Rod Processing | Bar cutting to 650mm |
| 601 Alloy Rounds Bar Form | Round, Rod, T-Bar, Channel Bar, Precision Ground Bar, Flat Bar, Square, Blocks, Round Rod, Rings, Hollow, Triangle, Rectangle, Hex (A/F), Threaded, Half Round Bar, Profiles, Billet, Ingot, I/H Bar, Forging etc. |
| Our 601 Inconel Round bar conforms to NACE MR0175/ISO 15156 | |
Inconel Alloy 601 Hex Bars, Inconel WNR. 2.4851 Round Bars, Inconel 601 traingular, ASME SB166 Polish Bars, Inconel 601 Bright Polished Bars, Inconel Alloy 601 Rough Turned Bars, ASTM B166 Inconel 601 Flat Bars, Inconel 601 Hexagonal Bars Exporters in India.
Inconel 601 Round Bars Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NC23FeA | NiCr23Fe | NA 49 | XH60BT |
Inconel 601 Round Bars Chemical Composition
| Grade | C | Mn | Si | Cu | S | Fe | Mo | Ni | Cr |
| Inconel 601 | 0.10 max | 1 max | 0.50 max | 1 max | 0.15 min | balance | 58.0-63.0 | 21.0–25.0 | – |
Inconel 601 Round Bars Mechanical Properties
| Density | Melting Point | Elongation | Tensile Strength | Yield Strength (0.2%Offset) |
| 7.95 g/cm3 | 1350 °C (2460 °F) | 35% | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 |
Other Types of Inconel Alloy 601 Round Bars
| Inconel 800/800H Round Bars | Inconel Alloy 800/800H Square Bars | Inconel 800/800H Hollow Bars |
| Inconel 800/800H Flat Bars | DIN 1.4958 Square Bars | Inconel Alloy 800/800H Threaded Bars |
| Inconel 800 ASME SB408 Hex Bars | Inconel Alloy 800/800H Triangular Bars | ASTM B408 Inconel 800/800H Bright Bar |
| UNS N08800 NO.4 Finish Bars | ASTM B408 Inconel 800/800H Hex Bar | Inconel 800 WNR. 1.4876 Square Bar |
| Inconel 800H Polished Bar | UNS N08810 Inconel Threaded Bar | Inconel 800/800H Bright Polished Round Bars |
| Inconel UNS N08800 Flat Bars | Inconel UNS N08810 Round Bars | Inconel 800/800H Matt Finish Round Bars |
| Incoloy 800 Patta | Incoloy 800 Patti | Incoloy 800 Rods price list |
| JIS NCF 800 Sheared & Edged bar | ansi 800 incoloy round bar price per kg | price of incoloy round bar 800 |
Countries We Export to
Ubique Alloys Pvt. Ltd. manufactures and exports to various countries such as Saudi Arabia, Bangladesh, United States, United Arab Emirates, Canada, Angola, Argentina, Austria, Azerbaijan, Pakistan, Peru, Chile, Kuwait, Mexico, Malaysia, Nigeria, Serbia, Singapore, Taiwan, Chile, Venezuela, Ecuador, Netherlands, Brazil, Vietnam, South Africa, Nigeria, Mexico, Turkey, Hungary, Algeria, Belarus, Belgium, Bhutan, Bolivia, Bulgaria, Croatia, Czech Republic, Estonia, Finland, Greece, Italy, Japan, Libya, Colombia, Ghana, Iran, Denmark, Poland, Australia, Afghanistan, Bahrain, Costa Rica, Egypt, Iraq, Jordan, South Korea, Kazakhstan, Sri Lanka, Lithuania, Norway, Oman, Philippines, Poland, Qatar, Spain, France, United Kingdom, Indonesia, Israel, Iran, Russia, Romania, Thailand, Trinidad & Tobago,Tunisia, Ukraine, Yemen, Hong Kong, Gabon, China, Portugal, Switzerland, New Zealand, Sweden, Slovakia, Kenya, Lebanon, Morocco, Mongolia
Cities We Deliver to
Ubique Alloys Pvt. Ltd. manufactures and exports to multiple cities such as Mumbai, Thane, Navi Mumbai, Pune, Pimpri-Chinchwad, Vadodara, Kolkata, Gurgaon, Ahmedabad, Seoul, Hyderabad, Singapore, Abu Dhabi, Tehran, Calgary, Noida, Riyadh, London, Coimbatore, Jakarta, Istanbul, Bangkok, Kuwait City, Sharjah, Muscat, Edmonton, Busan, Mexico City, Doha, New Delhi, Bengaluru, Chennai, Surat, Bhopal, Ulsan, Faridabad, Houston, Dubai, Jeddah, Aberdeen, Cairo, Geoje-si, Perth, Santiago, Chandigarh, Indore, Kuala Lumpur, Rio de Janeiro, Dammam, Melbourne, Madrid, La Victoria, Bogota, Lahore, Los Angeles, Algiers, Chiyoda, Ankara, Ho Chi Minh City, Toronto, Hong Kong, Howrah, Sydney, Ahvaz, Karachi, Rajkot, Brisbane, Petaling Jaya, Ernakulam, Secunderabad, Gimhae-si, Al Jubail, Port-of-Spain, Thiruvananthapuram, Milan, Atyrau, Lagos, Hanoi, New York, Caracas, Vung Tau, Al Khobar, Manama, Montreal, Granada, Courbevoie, Visakhapatnam, Ludhiana, Moscow, Dallas, Haryana, Colombo
